Peter Huber Kältemaschinenbau CC-520w Kälte-Badumwälzthermostat
Peter Huber Kältemaschinenbau ·Made in Germany · In Active Production

Peter Huber Kältemaschinenbau CC-520w Kälte-Badumwälzthermostat

Peter Huber Kältemaschinenbau CC-520w Kälte-Badumwälzthermostat — Thermostatic baths.

The CC-520w is a water-cooled circulating bath thermostat with a 17 l bath, a variable-speed pressure/suction pump, and a 3 kW heater, covering -55 to 200 °C with ±0.02 K stability. It is the 5-series modification with the largest cooling capacity in the Cc series, distinguished from the CC-505wl by its higher cooling output and 400 V three-phase supply. It serves as a temperature-control source for external circuits and bath applications requiring high heat rejection.

Direct drop-in replacements

Eppendorf
MixMate ®
45%
match
⚖️ Compare

Peter Huber Kältemaschinenbau Cc Modelle Bis 90C Series — Model Comparison & Selection

Model Noise level, dBPower supplyPump connectionTemperature range, °CWeight, kgFilling volume, m³
CC-520w Kälte-Badumwälzthermostat Current —400V 3~N 50HzM16x1 AG male-55–2001610.015
CC-410wl Kälte-Badumwälzthermostat —220-240V 1~/2~ 50/60HzM16x1 AG male-45–200710.017
CC-415wl Kälte-Badumwälzthermostat —220-240V 1~/2~ 50/60HzM16x1 AG male-40–200610.004
CC-508w Kälte-Badumwälzthermostat 57208-230V 1~/2~ 60HzM16x1 AG male-55–200—0.004
CC-510w Kälte-Badumwälzthermostat —400V 3~N 50HzM16x1 AG male-50–2001060.016
CC-515w Kälte-Badumwälzthermostat —400V 3~N 50HzM16x1 AG male-55–2001050.016
CC-525w Kälte-Badumwälzthermostat —400V 3~N 50HzM16x1 AG male-55–2001630.015
CC-905 Kälte-Badumwälzthermostat 64400V 3~N 50HzM16x1 AG male-90–2001710.019
CC-905w Kälte-Badumwälzthermostat —400V 3~N 50HzM16x1 AG male-90–2001750.019
CC-906w Kälte-Badumwälzthermostat —460V 3~ 60HzM16x1 AG male-90–2002340.025
CC-K12 Kälte-Badthermostat —220-240V 1~/2~ 50/60Hz(Option, #19607)-20–200290.007
CC-K15 Kälte-Badthermostat —220-240V 1~/2~ 50/60Hz(Option, #19607)-20–20028—
CC-K20 Kälte-Badthermostat 50220-240V 1~/2~ 50/60Hz(Option, #19607)-30–200410.012
CC-K25 Kälte-Badthermostat 50220-240V 1~/2~ 50/60Hz(Option, #19607)-30–200410.017
CC-K6 Kälte-Badumwälzthermostat 57208-240V 1~/2~ 50/60HzM16x1 AG male-25–20025—
Variostat Kältethermostat für variable Badgefäße 54220-240V 1~/2~ 50/60HzM16x1 AG male-30–15025—

Full specifications

Core Performance & Functional Specifications
Bath volume 17 l
Filling volume 15 l (min.)
Heating capacity 3 kW
Maximum delivery flow rate 25 l/min (pressure pump max.; 0, 7 bar)
Pump connection M16x1 AG male
Pump speed adjustable Yes
Pump type Pressure and suction pump, variable speed
External sensor connection Pt100
Temperature range -55...200 °C
Temperature stability mfr ±0, 02 K
Dimensions (W x D x H) mfr 539 x 629 x 1102 mm
Delivery capacity suction pump max. mfr 18, 5 l/min; 0, 4 bar
Bath opening WxD/BD mfr 270 x 150 / 200
Dimensions, Weight & Mechanical Design
Weight 161 kg
Electrical, Power & Drive Specifications
Power supply 400V 3~N 50Hz
Current consumption max. mfr 13, 5 A (max.)
Fuse mfr 3x16A
Interfaces, Connections & Control
Controller Pilot ONE
Digital interface Ethernet, USB (Host u. Device), RS232
Materials, Media & Process Compatibility
Maximum viscosity 50 mm²/s
Operating Conditions, Environment & Protection
Ambient temperature limit 5...40 °C
Cooling water connection G1/2 male
Cooling water consumption 288 l/h (at 15°C, flow 15°C)
Cooling water differential pressure 3 bar (min.)
Cooling Water Pressure 6 bar (max.)
Protection rating IP20
Cooling capacity mfr 100:5; 20:5; 0:5; -20:3; -40:1, 5 °C / kW
Standards, Safety & General Data
Safety class III / FL

Description

Construction and series positioning

The CC-520w is a floor-standing (539 x 629 x 1102 mm, 161 kg) circulating bath thermostat with a 17 l bath and a 270 x 150 mm opening (200 mm depth). It uses a water-cooled condenser (R-452A refrigerant) rather than an air-cooled one, which is why it requires a cooling-water circuit. Within the Cc series, the CC-520w is the highest-capacity water-cooled model; the CC-505wl is a smaller sibling, and the CC-405/410/415 models are lower-capacity variants. The CC-520w is the only sibling listed with a 400 V three-phase supply and 13.5 A maximum current.

Thermal behavior and media

Installation, connection and control

Integration & Operating Notes

Electrical
Three-phase supply must be sized for 13.5 A and 3x16 A fusing

The unit draws up to 13.5 A per phase and requires a 3x16 A fuse. The electrical installation must be planned for this load, and the customer must provide a suitable plug because the unit is delivered with cable but without plug. Voltage tolerance is ±5% with simultaneous frequency tolerance of ±2%.

CC-520w Circulating Bath Datasheet, page 2
Cooling & Media
Cooling water must stay within 5–20 °C and 3–6 bar differential

The water-cooled condenser requires a differential pressure of at least 3 bar and no more than 6 bar. Inlet temperature must be between 5 °C and 20 °C; higher temperatures reduce cooling capacity and may increase required flow. Pipes must be insulated if condensation can occur. The circuit contains copper, stainless steel 1.4401, MS, PA, PPE, PTFE and EPDM, so water quality must be compatible.

CC-520w Circulating Bath Datasheet, pages 1–2
Process Limits
Bath fluid viscosity must not exceed 50 mm²/s

The pump is rated for a maximum kinematic viscosity of 50 mm²/s. Using a more viscous fluid can overload the pump and reduce circulation. The pump connection is M16x1 male, and the bath requires a minimum filling of 15 l (10 l with displacement rack).

CC-520w Circulating Bath Datasheet, page 1
Maintenance
Refrigerant leak checks are required due to GWP 2141

The refrigerant is R-452A with a GWP of 2141 and a CO2 equivalent of 3.5 t. Regular leak monitoring and environmental reporting may be required depending on local regulations. The cooling water circuit should be checked for fouling and corrosion to maintain heat transfer.

CC-520w Circulating Bath Datasheet, page 1

Selection & Integration Q&A

When should I choose the CC-520w over the CC-505wl or the smaller CC-405/410/415 models?

Choose the CC-520w when you need the highest cooling capacity in the Cc series (5 kW at 20 °C) and a 400 V three-phase supply. The CC-505wl and 4-series models are lower-capacity variants; select them if your heat load is smaller or you only have a single-phase supply.

What are the requirements for the cooling water circuit and the external pump circuit?

Cooling water: G1/2 male connections, differential pressure 3–6 bar, inlet temperature 5–20 °C, flow 288 l/h at 15 °C. Pump circuit: M16x1 male connection, fluid viscosity ≤50 mm²/s. Ensure water quality is compatible with copper, stainless steel 1.4401, MS, PA, PPE, PTFE and EPDM.

What maintenance and accessories are required that are not included in the base delivery?

The unit is delivered with a cable but without a plug; the customer must provide a suitable three-phase plug. Refrigerant R-452A (GWP 2141) requires leak monitoring. Bath fluid and external Pt100 sensor are not included. Regular checks of cooling water quality and circuit fouling are recommended.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
CC-520w Circulating Bath Datasheet
Datasheet ·72,1 КБ ·2 pp.
View PDF