Elmo Rietschle 2BH7320
Elmo Rietschle 2BH7320 — Side-Channel / Regenerative Ring Blowers with Max. differential pressure -510 mbar, Motor power 3.5 kW, Noise level 77 dB.
The 2BH7320 is a side-channel blower from the G-BH7 e series, featuring an integrated frequency converter and a 400 V D-connected motor. It delivers up to 350 mbar pressure and -230 mbar vacuum at 50 Hz, rising to 375 mbar and -320 mbar at 87 Hz, distinguishing it from lower-output siblings like the 2BH7210. It is intended for continuous-duty vacuum or pressure generation in industrial processes where variable speed control is required.
Elmo Rietschle G-BH7 Series — Model Comparison & Selection
| Model | Motor power, kW | Noise level, dB | Max. differential pressure, mbar | Weight, kg | Current, A | Voltage, V |
|---|---|---|---|---|---|---|
| 2BH7320 Current | 3.5 | 77 | -510 | 48 | 6.5 | — |
| 2BH721 | 1 | 59 | -300 | 21 | 4.2 | 190–210 |
| 2BH7210 | 0.63 | 63 | -270 | 16 | 3.0 △ / 1.7 Y | 220-275 △ / 380-480 Y |
| 2BH722 | 1.1 | 58 | 480 | 28 | 4.8 UU / 2.4 U | 190-210 UU / 380-420 U |
| 2BH7220 | 0.81 | 58 | -440 | 24 | 4 | 220-275 / 380-480 Y |
| 2BH731 | 1.1 | 63 | -340 | 24 | 2.8–5.5 | 190-210 / 380-420 |
| 2BH7310 | 0.63 | 58 | 250 | — | 2.8 | 200-240 / 345-415 Y |
| 2BH732 | 1.3 | 64 | 440 | 33 | 3.2 | 190-210 / 380-420 |
| 2BH741 | 1.3 | 63 | — | 26 | 6.3 | 190–210 |
| 2BH7410 | 2.6 | 73 | -230 | 33 | 5.2 | 400 |
| 2BH742 | 1.8 | 64 | 460 | 38 | 3.9–7.8 | 190-210 / 380-420 |
| 2BH7420 | 2.9 | 77 | -270 | 45 | 6.5 | 380 |
| 2BH751 | 1.8 | 68 | -340 | 33 | 7.8 UU | 190-210 UU / 380-420 U |
| 2BH7510 | 6.6 | 78 | 430 | 43 | 12.7 | 400 |
| 2BH752 | 2.5 | 64 | -520 | 50 | 12 | 190-210 / 380-420 |
| 2BH7520 | 4.3 | 77 | -520 | 57 | 8.7 | 400 V (-15%) … 480 V (+1 |
| 2BH753 | 5.3 | 69 | 950 | 72 | 17.1 | 190–210 |
| 2BH7530 | 7.5 | 70 | -610 | 80 | 16.2 | 400 |
| 2BH7610 | 5.8 | 80 | -410 | 55 | 12.7 | 380 |
| 2BH7620 | 8.8 | 79 | -530 | 77 | 16.2 | 400 |
| 2BH7630 | 16 | 80 | -500 | 121 | 29 | 400 |
Full specifications
| Max. differential pressure | -510 mbar (100 Hz, 400 V) |
| Motor power | 3.5 kW (100 Hz, 400 V) |
| Noise level | 77 dB (100 Hz, 400 V) |
| Max. differential pressure vacuum mfr | -230 mbar (50 Hz) |
| Max. differential pressure vacuum mfr | -610 mbar (87 Hz) |
| Max. differential pressure vacuum mfr | -600 mbar (100 Hz) |
| Order No. mfr | 2BH7320-0A356-1 |
| Motor connection mfr | delta |
| Max. differential pressure (alt 100 Hz, 400 V) mfr | 400 mbar (100 Hz, 400 V) |
| Weight | 48 kg (100 Hz, 400 V) |
| Current | 6.5 A (100 Hz, 400 V) |
| Rated motor voltage mfr | 400 V (50 Hz D connection) |
| Rated motor current mfr | 6.1 A (50 Hz D connection) |
| Rated motor voltage mfr | 345 V (87 Hz D connection (frequency converter)) |
| Rated motor current mfr | 6.5 A (87 Hz D connection (frequency converter)) |
| Frequency converter rated mains voltage mfr | 400V (-15%) ... 480V (+10%) V (50/60 Hz ±6%) |
| Rated mains voltage mfr | 400 V (100 Hz) |
| Rated motor current mfr | 9.8 A (100 Hz) |
| Rated motor power mfr | 5.0 kW (100 Hz) |
| Rated motor current mfr | 6.1 A (87 Hz) |
| Rated motor power mfr | 2.9 kW (87 Hz) |
| Minimum frequency converter mains voltage mfr | 380 V |
| Minimum pulse frequency mfr | 4 kHz |
| Mains frequency mfr | 50/60 Hz (50/60 Hz) |
| Sound pressure level mfr | 63 dB(A) (50 Hz) |
| Sound pressure level mfr | 77 dB(A) (87 Hz) |
| Sound pressure level mfr | 77 dB(A) (100 Hz) |
| Protection class mfr | IP55 |
Description
Construction and series positioning
The 2BH7320 is a regenerative ring blower with an integrated frequency converter, part of the G-BH7 e series. Unlike the base 2BH7210 and 2BH7220 models, this variant includes a factory-mounted converter that enables speed adjustment and higher output at elevated frequency. The motor is wound for D connection at 400 V (50 Hz) and can be operated up to 87 Hz with a frequency converter, where the rated voltage is 345 V. The blower is a compact unit weighing approximately 36 kg, suitable for direct mounting in a system without a separate control cabinet for the drive.
Performance and load behavior
At 50 Hz, the maximum differential pressure is 350 mbar in pressure mode and -230 mbar in vacuum mode. When operated at 87 Hz via the integrated converter, these limits increase to 375 mbar and -320 mbar respectively. The sound pressure level rises from 63 dB(A) at 50 Hz to 73 dB(A) at 87 Hz, which must be considered for noise-sensitive installations. The motor draws 6.1 A at 50 Hz and 6.5 A at 87 Hz, indicating that the converter allows higher speed without a proportional increase in current, but the thermal limits of the motor must be respected.
Installation and control
Electrical connection requires a 400 V three-phase supply for the converter, which accepts mains voltages from 400 V (-15%) to 480 V (+10%) at 50/60 Hz ±6%. The integrated frequency converter provides speed control and soft-start capability, reducing mechanical stress on the blower and connected piping. The converter must be configured for the motor data (345 V at 87 Hz) to avoid overfluxing. The blower can be mounted in any orientation, but adequate clearance for cooling air and access to the converter terminals is necessary. The data sheet lists converter options A–K (2FC4xxx) and accessories, but these are not included in the base delivery unless specified.
Integration & Operating Notes
The integrated frequency converter is rated for 400 V (-15%) to 480 V (+10%) at 50/60 Hz ±6%. Exceeding these limits, especially overvoltage, can damage the converter's DC link capacitors and input rectifier. Ensure the supply is stable and protected against surges; consider a line reactor if the supply is subject to frequent transients.
The blower is limited to 350 mbar pressure and -230 mbar vacuum at 50 Hz, or 375 mbar and -320 mbar at 87 Hz. Operating beyond these limits will cause excessive temperature rise and may damage the impeller or bearings. Install pressure relief valves or monitor differential pressure to ensure the system does not exceed these values under any condition.
The integrated frequency converter and motor rely on forced air cooling. Dust and debris can clog the cooling fins and fan, leading to overheating and reduced service life. Inspect and clean the cooling paths at least every 2000 operating hours or more frequently in dusty environments. Ensure the converter's heatsink is free of obstructions.
Selection & Integration Q&A
Choose the 2BH7320 when you need higher pressure/vacuum (up to 375 mbar / -320 mbar) and integrated speed control. The 2BH7210 and 2BH7220 are lower-output models without an integrated converter, suitable for fixed-speed applications with lower demands.
The integrated converter requires a 400–480 V three-phase supply within -15%/+10% and 50/60 Hz ±6%. No external drive is needed, but you must provide appropriate fusing and a disconnect switch. Accessories like cables and mating flanges are not included and must be ordered separately.
Regular maintenance includes cleaning cooling fins and checking the converter fan every 2000 hours. Bearings are sealed for life. Consumables like air filters (if used) and mating flanges are not included in the base delivery and must be specified separately.