Elmo Rietschle 2BH7510
Elmo Rietschle ·Made in Germany · In Active Production

Elmo Rietschle 2BH7510

Elmo Rietschle 2BH7510 — Side-Channel / Regenerative Ring Blowers with Max. differential pressure 430 mbar, Motor power 5 kW, Noise level 78 dB.

The 2BH7510 is a side-channel blower from the G-BH7 e series, integrating a frequency converter for variable-speed operation. It delivers up to 440 mbar pressure or -430 mbar vacuum, distinguishing it from smaller siblings like the 2BH7210 by its higher capacity. It serves as a compact, controllable air source for pneumatic conveying, aeration, or vacuum holding in industrial systems.

Max. differential pressure
430 mbar
Motor power
5 kW
Noise level
78 dB
Weight
45 kg

Elmo Rietschle G-BH7 Series — Model Comparison & Selection

Model Motor power, kWNoise level, dBMax. differential pressure, mbarWeight, kgCurrent, AVoltage, V
2BH7510 Current 6.6784304312.7400
2BH721 159-300214.2190–210
2BH7210 0.6363-270163.0 △ / 1.7 Y220-275 △ / 380-480 Y
2BH722 1.158480284.8 UU / 2.4 U190-210 UU / 380-420 U
2BH7220 0.8158-440244220-275 / 380-480 Y
2BH731 1.163-340242.8–5.5190-210 / 380-420
2BH7310 0.6358250—2.8200-240 / 345-415 Y
2BH732 1.364440333.2190-210 / 380-420
2BH7320 3.577-510486.5—
2BH741 1.363—266.3190–210
2BH7410 2.673-230335.2400
2BH742 1.864460383.9–7.8190-210 / 380-420
2BH7420 2.977-270456.5380
2BH751 1.868-340337.8 UU190-210 UU / 380-420 U
2BH752 2.564-5205012190-210 / 380-420
2BH7520 4.377-520578.7400 V (-15%) … 480 V (+1
2BH753 5.3699507217.1190–210
2BH7530 7.570-6108016.2400
2BH7610 5.880-4105512.7380
2BH7620 8.879-5307716.2400
2BH7630 1680-50012129400

Full specifications

Core Performance & Functional Specifications
Max. differential pressure 430 mbar (50 Hz)
60 Hz: 430 mbar
Motor power 5.0 kW (50 Hz)
60 Hz: 6.6 kW
Noise level 78 dB(A) (50 Hz)
60 Hz: 80 dB(A)
Max differential pressure vacuum mfr -430 mbar
Max differential pressure vacuum mfr -430 mbar (50 Hz)
Order No mfr 2BH7510-0A351-1
Max differential pressure vacuum mfr -430 mbar (60 Hz)
Max differential pressure compressor (alt 50 Hz) mfr 440 mbar (50 Hz)
Max differential pressure compressor (alt 60 Hz) mfr 600 mbar (60 Hz)
Dimensions, Weight & Mechanical Design
Weight 43 kg (50 Hz)
60 Hz: 45 kg
Weight approx mfr 72 kg
Electrical, Power & Drive Specifications
Current 9.8 A (50 Hz)
60 Hz: 12.7 A
Frequency 50 Hz (50 Hz)
60 Hz: 60 Hz
Power supply 3~ 50/60 Hz
Voltage 400 V (50 Hz)
60 Hz: 400 V
Rated mains voltage mfr 400 V (Delta connection)
Rated motor voltage mfr 345 V (Delta connection)
Rated motor current mfr 8.7 A (Delta connection)
Rated motor power mfr 4.3 kW (Delta connection)
Rated motor voltage mfr 400 V (Star connection)
Rated motor current mfr 5.8 A (Star connection)
Rated motor power mfr 2.9 kW (Star connection)
Rated mains voltage mfr 400 U V
Rated mains current mfr 12.7 A
Typical motor power mfr 6.6 kW
Mains voltage range mfr 400V (-15%) ... 480V (+10%) V
Rated frequency mfr 60 Hz (50/60 Hz)
Rated current mfr 12.7 A (60 Hz)
Rated power mfr 6.6 kW (60 Hz)
Rated voltage/frequency set point mfr 345 V / 87 Hz (delta connection)
Mains voltage minimum mfr 380 V
Operating Conditions, Environment & Protection
Protection rating IP55
Operating temperature 25 degC
Sound pressure level mfr 80 dB(A)
Sound pressure level mfr 78 dB(A) (50 Hz)
Sound pressure level mfr 80 dB(A) (60 Hz)

Description

Construction and Series Positioning

The 2BH7510 is a side-channel (regenerative) blower with an integrated frequency converter, part of the G-BH7 e series. Unlike the basic 2BH7210 or 2BH7220 models, this unit includes a built-in variable-frequency drive, enabling speed control without external VFDs. The blower is configured for 400 V mains (range 400 V -15% to 480 V +10%, 50/60 Hz ±6%) and delivers a maximum differential pressure of 440 mbar or vacuum of -430 mbar. With a motor power of 5.0 kW at 50 Hz and 6.6 kW at 60 Hz, and a weight of 72 kg, it sits in the mid-to-upper range of the series, offering higher pressure and flow than the smaller 2BH7210/2BH7220 variants.

Performance and Load Behavior

The blower is designed for continuous duty in either pressure or vacuum mode. The integrated frequency converter allows adjustment of motor speed to match process demand, which can reduce energy consumption at partial load. The motor is rated for 4.3 kW at 87 Hz in delta connection (8.7 A) and 2.9 kW at 87 Hz in star connection (5.8 A), indicating that the converter output is configured for these operating points. The sound pressure level is 80 dB(A), typical for this size class. No digitized curve points are available, so precise flow-pressure characteristics must be obtained from Elmo Rietschle selection software.

Installation, Connection, and Control

The unit requires a 400 V three-phase supply and must be connected according to the wiring diagram in the technical data sheet. The integrated frequency converter provides control terminals for 0-10 V or 4-20 mA speed reference, as well as digital inputs for start/stop and fault reset. The blower can be mounted in any orientation, but ensure sufficient clearance for cooling air. The technical data sheet lists multiple blower and converter variant codes; the specific variant must be confirmed at order. The converter parameters are factory-set for the blower; changes to motor data may require re-commissioning by qualified personnel.

Integration & Operating Notes

Electrical
Mains voltage must stay within -15% to +10% of 400 V

The integrated frequency converter is sensitive to overvoltage and undervoltage. Exceeding the specified range can cause converter faults or damage. Use a stabilized supply or appropriate transformer if the site voltage fluctuates beyond these limits.

Technical Data Sheet — G-BH7 2BH7510, Electrical Data
Control & I/O
Enable signal must be present before speed reference is applied

The converter requires a digital enable input to be closed before it will respond to an analog speed setpoint. Applying a setpoint without enable will not start the blower. Wire the enable to a safety relay or controller output that confirms safe conditions.

Technical Data Sheet — G-BH7 2BH7510, Control Terminals
Process Limits
Differential pressure must not exceed 440 mbar in pressure mode

Operating above the maximum differential pressure can cause overheating and motor overload. Install a pressure relief valve or ensure the system resistance cannot exceed this limit under any condition, including blocked filters.

Technical Data Sheet — G-BH7 2BH7510, Performance Data
Maintenance
Inspect and clean the impeller and inlet filter every 2000 hours

Dust buildup on the impeller reduces performance and can cause imbalance. The inlet filter (if fitted) must be cleaned or replaced regularly. In dusty environments, shorten the interval. Refer to the maintenance schedule in the operating manual.

Technical Data Sheet — G-BH7 2BH7510, Maintenance

Selection & Integration Q&A

When should I choose the 2BH7510 over the smaller 2BH7210 or 2BH7220?

Choose the 2BH7510 when you need higher pressure (up to 440 mbar) or vacuum (-430 mbar) and flow than the 2BH7210/2BH7220 can provide. The 2BH7510 also includes an integrated frequency converter for speed control, whereas the smaller models may require an external VFD. Select a smaller sibling if your required pressure is below 300 mbar and space or budget is tight.

What are the requirements for the power supply and upstream protection for this blower?

The 2BH7510 requires a 400 V three-phase supply (range 400 V -15% to 480 V +10%, 50/60 Hz ±6%). The converter input current is 12.7 A at 60 Hz (9.8 A at 50 Hz). Use a circuit breaker or fuses sized to this input current, and ensure proper earthing. A line reactor may be needed if the supply has significant harmonics or voltage distortion.

Can the blower be mounted outdoors or in a wet environment?

The standard 2BH7510 is not weatherproof and must be installed in a dry, indoor location with adequate ventilation. Ambient temperature should be between -20°C and +40°C. If outdoor installation is required, a protective enclosure or shelter must be provided. Avoid condensing humidity.

What maintenance items and accessories are not included in the base delivery?

The base delivery includes the blower with integrated frequency converter but excludes inlet/outlet silencers, filters, flexible connectors, and control cables. These must be ordered separately. Regular maintenance includes inspecting and cleaning the impeller and inlet filter every 2000 hours. Spare parts kits are available from Elmo Rietschle.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Technical Data Sheet — G-BH7 2BH7510 side channel blower (EN)
Datasheet ·510,4 КБ ·2 pp.
View PDF