Elmo Rietschle 2BH7610
Elmo Rietschle ·Made in Germany · In Active Production

Elmo Rietschle 2BH7610

Elmo Rietschle 2BH7610 — Side-Channel / Regenerative Ring Blowers with Max. differential pressure -440 mbar, Motor power 5.8 kW, Noise level 80 dB.

The 2BH7610 is a side-channel blower with an integrated frequency converter (IP55) and wall-mounting configuration, delivering up to 420 mbar differential pressure at 50 Hz and 440 mbar at 60 Hz from a 5.5–5.8 kW motor. It is distinguished within the G-BH7 series by its factory-integrated VFD, enabling speed control without external cabinet space. Primary use is vacuum or pressure generation in pneumatic conveying, drying, and aeration systems where compact, controllable air supply is required.

Max. differential pressure
-440 mbar
Motor power
5.8 kW
Noise level
80 dB
Weight
55 kg

Elmo Rietschle G-BH7 Series — Model Comparison & Selection

Model Motor power, kWNoise level, dBMax. differential pressure, mbarWeight, kgCurrent, AVoltage, V
2BH7610 Current 5.880-4105512.7380
2BH721 159-300214.2190–210
2BH7210 0.6363-270163.0 △ / 1.7 Y220-275 △ / 380-480 Y
2BH722 1.158480284.8 UU / 2.4 U190-210 UU / 380-420 U
2BH7220 0.8158-440244220-275 / 380-480 Y
2BH731 1.163-340242.8–5.5190-210 / 380-420
2BH7310 0.6358250—2.8200-240 / 345-415 Y
2BH732 1.364440333.2190-210 / 380-420
2BH7320 3.577-510486.5—
2BH741 1.363—266.3190–210
2BH7410 2.673-230335.2400
2BH742 1.864460383.9–7.8190-210 / 380-420
2BH7420 2.977-270456.5380
2BH751 1.868-340337.8 UU190-210 UU / 380-420 U
2BH7510 6.6784304312.7400
2BH752 2.564-5205012190-210 / 380-420
2BH7520 4.377-520578.7400 V (-15%) … 480 V (+1
2BH753 5.3699507217.1190–210
2BH7530 7.570-6108016.2400
2BH7620 8.879-5307716.2400
2BH7630 1680-50012129400

Full specifications

Core Performance & Functional Specifications
Max. differential pressure -410 mbar (100 Hz)
87 Hz: -440 mbar
Motor power 6.6 kW (100 Hz)
87 Hz: 5.8 kW
Noise level 80 dB (100 Hz)
87 Hz: 80 dB
Max differential pressure vacuum mfr 420 mbar (50 Hz)
Max differential pressure vacuum mfr 440 mbar (60 Hz)
Model code mfr 2BH7610-0A
Order No. mfr 2BH7610-0A321-2 (100 Hz)
Max. differential pressure vacuum mfr -440 mbar (87 Hz)
Order No. mfr 2BH7610-0A326-2 (87 Hz)
Max. differential pressure (alt 100 Hz) mfr 350 mbar (100 Hz)
Max. differential pressure (alt 87 Hz) mfr 420 mbar (87 Hz)
Dimensions, Weight & Mechanical Design
Weight 55 kg (100 Hz)
87 Hz: 53 kg
Weight approx. mfr 50 kg
Weight approx. mfr 53 kg (87 Hz)
Electrical, Power & Drive Specifications
Current 12.7 A (100 Hz)
87 Hz: 11.6 A
Frequency 100 Hz
Power supply 3~ 50/60 Hz, IP55, Insulation class F
Voltage 400 V (100 Hz)
87 Hz: 380 V
Rated motor voltage mfr 400 V (50 Hz)
Rated motor current mfr 12.7 A (50 Hz)
Rated motor power mfr 5.5 kW (50 Hz)
Rated motor voltage mfr 380 V (60 Hz)
Rated motor current mfr 11.6 A (60 Hz)
Rated motor power mfr 5.8 kW (60 Hz)
Rated motor voltage mfr 400 V (100 Hz)
Rated motor current mfr 12.7 A (100 Hz)
Rated motor voltage mfr 380 V (87 Hz)
Rated motor current mfr 11.6 A (87 Hz)
Rated motor power mfr 5.8 kW (87 Hz)
Operating Conditions, Environment & Protection
Protection rating IP55
Operating temperature 25 degC
Sound pressure level mfr 55 dB(A) (50 Hz)
Sound pressure level mfr 55 dB(A) (60 Hz)
Sound pressure level mfr 75/76 dB(A) (100 Hz)
Sound pressure level mfr 80 dB(A) (87 Hz)
Sound pressure level (alt 100 Hz) mfr 75/76 dB (100 Hz)

Description

Construction and series positioning

Behavior under load and media

Installation, connection, and control

Integration & Operating Notes

Mounting
Wall fixing must support 50 kg plus dynamic loads

The blower weighs approximately 50 kg; wall anchors and brackets must be rated for this static mass plus vibration and reaction torque during operation. Inadequate fixing risks loosening, noise, and damage to the integrated converter.

Technical Data Sheet — G-BH7 2BH7610 side channel blower (EN
Electrical
Integrated VFD requires 400 V or 380 V supply

The 2BH7610-0A is offered with 400 V (50 Hz) or 380 V (60 Hz) motor ratings. The integrated frequency converter (IP55) is factory-matched to the motor; supply voltage and frequency must match the ordered variant to avoid derating or damage.

Technical Data Sheet — G-BH7 2BH7610 side channel blower (EN
Process Limits
Differential pressure must not exceed 420/440 mbar

Maximum differential pressure is 420 mbar at 50 Hz and 440 mbar at 60 Hz in both vacuum and pressure modes. Operating above these limits can cause overheating, motor overload, or mechanical damage; the integrated converter’s settings must enforce this limit.

Technical Data Sheet — G-BH7 2BH7610 side channel blower (EN
Control & I/O
VFD size A–K determines control interface

The data sheet lists VFD sizes A–K (2FC4xxx-1□□00) for the 2BH7610-0A. The specific size affects available control terminals and parameter set; the exact I/O and communication options must be taken from the VFD manual for the delivered size.

Technical Data Sheet — G-BH7 2BH7610 side channel blower (EN

Selection & Integration Q&A

When should I choose the 2BH7610 instead of a sibling model like 2BH7210 or 2BH7220?

Choose 2BH7610 when you need an integrated frequency converter (IP55) for speed control without a separate VFD cabinet, and when 420–440 mbar differential pressure at 5.5–5.8 kW suits your duty. Siblings 2BH7210/2BH7220 are listed without integrated VFD details; select them if a bare blower with external drive is preferred or if their performance range matches better.

What are the power supply and drive requirements for the 2BH7610?

The 2BH7610-0A is available with 400 V (50 Hz) or 380 V (60 Hz) motor ratings and an integrated frequency converter (IP55). Supply voltage and frequency must match the ordered variant. The VFD size (A–K, 2FC4xxx-1□□00) is factory-matched; no external drive is required, but control wiring depends on the VFD size.

What mounting and environmental limits apply to the 2BH7610?

The unit is designed for wall mounting and weighs approximately 50 kg; the wall structure and fixings must support this mass plus dynamic loads. The integrated converter is IP55, so the enclosure is protected against dust and water jets, but ambient temperature limits and ventilation requirements are not specified in the available digest and must be confirmed with the manufacturer.

What maintenance and accessories are required for the 2BH7610?

No maintenance schedule, service intervals, or accessory list is provided in the verified facts. The base delivery includes the blower with integrated frequency converter; cables, filters, silencers, and spare parts are not mentioned and must be specified separately. Consult the full instruction manual for maintenance requirements and optional accessories.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Technical Data Sheet — G-BH7 2BH7610 side channel blower (EN)
Datasheet ·260,0 КБ ·2 pp.
View PDF