Elmo Rietschle 2BH732
Elmo Rietschle ·Made in Germany · In Active Production

Elmo Rietschle 2BH732

Elmo Rietschle 2BH732 — Side-Channel / Regenerative Ring Blowers with Max. differential pressure 480 mbar, Motor power 1.6 kW, Noise level 60 dB.

The 2BH732 is a side-channel (regenerative ring) blower built around an IE3-class 3-phase motor, supplied in the 2BH7320-0AK41-1 order variant with 190–210 Δ / 380–420 Y V windings for 50 and 60 Hz operation. It delivers up to 480 mbar differential pressure and −440 mbar vacuum at 60 Hz from a 1.6 kW, 33 kg package, positioning it as the larger frame in the 2BH72x family. It serves as a compact pressure/vacuum source for pneumatic conveying, aeration, and holding-duty process air in machine-integrated systems.

Max. differential pressure
480 mbar
Motor power
1.6 kW
Noise level
60 dB
Weight
33 kg

Elmo Rietschle G-BH7 Series — Model Comparison & Selection

Model Motor power, kWNoise level, dBMax. differential pressure, mbarWeight, kgCurrent, AVoltage, V
2BH732 Current 1.364440333.2190-210 / 380-420
2BH721 159-300214.2190–210
2BH7210 0.6363-270163.0 △ / 1.7 Y220-275 △ / 380-480 Y
2BH722 1.158480284.8 UU / 2.4 U190-210 UU / 380-420 U
2BH7220 0.8158-440244220-275 / 380-480 Y
2BH731 1.163-340242.8–5.5190-210 / 380-420
2BH7310 0.6358250—2.8200-240 / 345-415 Y
2BH7320 3.577-510486.5—
2BH741 1.363—266.3190–210
2BH7410 2.673-230335.2400
2BH742 1.864460383.9–7.8190-210 / 380-420
2BH7420 2.977-270456.5380
2BH751 1.868-340337.8 UU190-210 UU / 380-420 U
2BH7510 6.6784304312.7400
2BH752 2.564-5205012190-210 / 380-420
2BH7520 4.377-520578.7400 V (-15%) … 480 V (+1
2BH753 5.3699507217.1190–210
2BH7530 7.570-6108016.2400
2BH7610 5.880-4105512.7380
2BH7620 8.879-5307716.2400
2BH7630 1680-50012129400

Full specifications

Core Performance & Functional Specifications
Max. differential pressure 440 mbar (50 Hz, vacuum)
60 Hz, vacuum: 510 mbar · 50 Hz, pressure: 480 mbar · 60 Hz, pressure: 480 mbar
Motor power 1.3 kW (50 Hz)
60 Hz: 1.6 kW
Noise level 60 dB (50 Hz, IE3)
60 Hz, IE3: 64 dB · 60 Hz, NP: 64 dB
Max. differential pressure vacuum mfr -440 mbar (60 Hz)
Order No. mfr 2BH7320-0AK41-1
Vacuum mfr -440 mbar (50 Hz)
Efficiency mfr IE3 (50 Hz)
Vacuum mfr -510 mbar (60 Hz)
Efficiency mfr NP (60 Hz)
Dimensions, Weight & Mechanical Design
Weight 33 kg
Electrical, Power & Drive Specifications
Current 5.6 A (50 Hz, 190-210 V)
60 Hz, 190-210 V: 6.3 A · 60 Hz, 380-420 V: 3.2 A
Frequency 50/60 Hz
Power supply 3~ 50/60 Hz
Voltage 190-210 V (50 Hz)
60 Hz: 190-210 / 380-420 V
Efficiency class mfr IE3
Operating Conditions, Environment & Protection
Protection rating IP55
Sound pressure level mfr 64 dB(A)
Sound pressure level mfr 60 dB(A) (50 Hz)
Sound pressure level mfr 64 dB(A) (60 Hz)

Description

Construction and series positioning

Working range and behavior

Installation and operation

Integration & Operating Notes

Electrical
Match winding links to line voltage before first start

The -0AK41-1 motor is dual-voltage (190–210 V Δ / 380–420 V Y). Energizing with incorrect terminal links will over-flux or under-torque the IE3 motor; verify the link plate against the actual supply and record it at commissioning.

Technical Data Sheet — 2BH732 IE3 vacuum pump (EN), voltage variants
Electrical
Protection device must be set to 5.6 A at 60 Hz

The 60 Hz current is 5.6 A; the motor-protection setting and cable sizing must be based on this value plus the installation method, not on the 50 Hz power rating alone. Confirm the 50 Hz current from the full manual if operating at 50 Hz.

Technical Data Sheet — 2BH732 IE3 vacuum pump (EN), current rating
Process Limits
Do not exceed 480 mbar pressure or −440 mbar vacuum

These are the maximum differential pressures quoted at 60 Hz. Operating beyond them moves the blower off its stable side-channel characteristic and raises motor load and temperature; the working point must be checked against the published curve for this order number.

Technical Data Sheet — 2BH732 IE3 vacuum pump (EN), max differential pressure
Maintenance
Obtain the full 2BH7 320 manual for service intervals

The attached data sheet digest contains no maintenance schedule, error codes, or spare-parts list. Bearing, filter, and seal service planning must be taken from the complete instruction manual for the 2BH7 320 type before the unit is put into continuous duty.

Technical Data Sheet — 2BH732 IE3 vacuum pump (EN), scope

Selection & Integration Q&A

When should I specify the 2BH732 (2BH7320-0AK41-1) rather than a 2BH721 or 2BH722 from the same series?

Choose the 2BH732 when the duty needs up to 480 mbar pressure or −440 mbar vacuum at 60 Hz and the 1.6 kW / 33 kg frame is acceptable. The 2BH721/2BH722 siblings are smaller frames; use them only if their published curves cover the required pressure at the required flow.

What supply and protection must be provided for this specific winding variant?

The -0AK41-1 build is wound 190–210 V Δ / 380–420 V Y at 50 and 60 Hz, drawing 5.6 A at 60 Hz. Set the terminal links for the actual line voltage, provide a motor-protection device set to the nameplate current, and confirm the IE3 motor's IP55 enclosure is not compromised by cable entries.

What is not included in base delivery and what service items should be planned?

The data sheet lists only the blower and its order number; mating flanges, silencers, filters, flexible connectors, and power cable are not part of the base unit. The digest contains no maintenance schedule, so interval and spare-part planning must come from the full instruction manual.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Technical Data Sheet — 2BH732 IE3 vacuum pump (EN)
Datasheet ·386,1 КБ ·3 pp.
View PDF