Elmo Rietschle 2BH7220
Elmo Rietschle 2BH7220 — Side-Channel / Regenerative Ring Blowers with Max. differential pressure -370 mbar, Motor power 0.94 kW, Noise level 58 dB.
The 2BH7220 is a side-channel (regenerative) blower in Elmo Rietschle's G-BH7 series, built as a single-stage, directly driven unit with a 1.75 kW motor and IP55 protection. It delivers up to 490 mbar gauge pressure or -370 mbar vacuum, positioning it as the mid-range 220 frame size between the smaller 2BH7210 and larger 2BH7310 siblings. Its primary role is to provide oil-free, pulsation-free air for vacuum holding, aeration, or low-pressure transport in industrial systems.
Elmo Rietschle G-BH7 Series — Model Comparison & Selection
| Model | Motor power, kW | Noise level, dB | Max. differential pressure, mbar | Weight, kg | Current, A | Voltage, V |
|---|---|---|---|---|---|---|
| 2BH7220 Current | 0.81 | 58 | -440 | 24 | 4 | 220-275 / 380-480 Y |
| 2BH721 | 1 | 59 | -300 | 21 | 4.2 | 190–210 |
| 2BH7210 | 0.63 | 63 | -270 | 16 | 3.0 △ / 1.7 Y | 220-275 △ / 380-480 Y |
| 2BH722 | 1.1 | 58 | 480 | 28 | 4.8 UU / 2.4 U | 190-210 UU / 380-420 U |
| 2BH731 | 1.1 | 63 | -340 | 24 | 2.8–5.5 | 190-210 / 380-420 |
| 2BH7310 | 0.63 | 58 | 250 | — | 2.8 | 200-240 / 345-415 Y |
| 2BH732 | 1.3 | 64 | 440 | 33 | 3.2 | 190-210 / 380-420 |
| 2BH7320 | 3.5 | 77 | -510 | 48 | 6.5 | — |
| 2BH741 | 1.3 | 63 | — | 26 | 6.3 | 190–210 |
| 2BH7410 | 2.6 | 73 | -230 | 33 | 5.2 | 400 |
| 2BH742 | 1.8 | 64 | 460 | 38 | 3.9–7.8 | 190-210 / 380-420 |
| 2BH7420 | 2.9 | 77 | -270 | 45 | 6.5 | 380 |
| 2BH751 | 1.8 | 68 | -340 | 33 | 7.8 UU | 190-210 UU / 380-420 U |
| 2BH7510 | 6.6 | 78 | 430 | 43 | 12.7 | 400 |
| 2BH752 | 2.5 | 64 | -520 | 50 | 12 | 190-210 / 380-420 |
| 2BH7520 | 4.3 | 77 | -520 | 57 | 8.7 | 400 V (-15%) … 480 V (+1 |
| 2BH753 | 5.3 | 69 | 950 | 72 | 17.1 | 190–210 |
| 2BH7530 | 7.5 | 70 | -610 | 80 | 16.2 | 400 |
| 2BH7610 | 5.8 | 80 | -410 | 55 | 12.7 | 380 |
| 2BH7620 | 8.8 | 79 | -530 | 77 | 16.2 | 400 |
| 2BH7630 | 16 | 80 | -500 | 121 | 29 | 400 |
Full specifications
| Max. differential pressure | -370 mbar (50 Hz) 60 Hz: -440 mbar |
| Motor power | 0.81 kW (50 Hz) 60 Hz: 0.94 kW |
| Noise level | 58 dB (50 Hz) 60 Hz: 63 dB |
| Pumping speed | 490 m³/hour (50 Hz) 60 Hz: 480 m³/hour |
| Protection category mfr | IP55 |
| Rated pressure (vacuum) mfr | -370 mbar (50 Hz) |
| Rated pressure (vacuum) mfr | -440 mbar (60 Hz) |
| Max. differential pressure (vacuum) mfr | 490 mbar (50 Hz) |
| Max. differential pressure (vacuum) mfr | 480 mbar (60 Hz) |
| Order No. mfr | 2BH7220-0AH26-1 |
| Weight | 24 kg |
| Current | 4.0 A (50 Hz) 60 Hz: 4.0 / 2.3 Y A |
| Voltage | 200-240 V (50 Hz) 60 Hz: 220-275 / 380-480 Y V |
| Rated voltage mfr | 220-275 Δ / 380-480 Y V (60 Hz) |
| Rated power mfr | 1.75 kW (50 Hz) |
| Rated power mfr | 1.75 kW (60 Hz) |
| Frequency mfr | 60 Hz |
| Sound pressure level mfr | 58 dB(A) (50 Hz) |
| Sound pressure level mfr | 63 dB(A) (60 Hz) |
Description
Construction and series positioning
- The 2BH7220 uses a side-channel impeller directly mounted on the motor shaft, eliminating belts or couplings and reducing maintenance to bearing and filter checks.
- Within the G-BH7 series, the 220 frame sits between the 210 (2BH7210) and 310 (2BH7310) sizes; the 2BH7220 offers higher pressure and vacuum capability than the 210 but lower flow than the 310.
- The motor is a 1.75 kW, 2-pole AC induction type with class F insulation and IP55 protection, available in dual-voltage windings for 50 Hz and 60 Hz operation.
Performance behaviour
- Maximum differential pressure is 490 mbar in pressure mode at 50 Hz (480 mbar at 60 Hz) and -370 mbar in vacuum mode at both frequencies.
- Sound pressure level is 58 dB(A) at 50 Hz and 63 dB(A) at 60 Hz, measured at typical operating conditions.
- The blower is oil-free and contact-free between impeller and housing, so no lubrication is required in the air path; this suits clean processes but limits use to media compatible with aluminium and cast iron.
Electrical and control specifics
- The motor windings can be connected in delta (Δ) for 200–240 V at 50 Hz or 220–275 V at 60 Hz, or in star (Y) for 345–415 V at 50 Hz or 380–480 V at 60 Hz.
- Rated current is 4.0 A in delta and 2.3 A in star at both frequencies, so the supply and protection must be sized for the delta connection if used.
- No integrated control or VFD is supplied; the blower is a fixed-speed device that relies on external contactors, overloads, and optional sensors for process control.
Integration & Operating Notes
The motor terminal box must be wired for either delta (200–240 V at 50 Hz) or star (345–415 V at 50 Hz) according to the supply voltage. Incorrect link placement will apply wrong voltage per winding and can destroy the motor. Verify the connection diagram on the motor nameplate before energising.
Although the blower is oil-free, the motor bearings are grease-lubricated for life under normal conditions. Inspect and replace intake filters (if fitted) regularly to prevent clogging, which reduces flow and increases motor load. Check for unusual noise or vibration indicating bearing wear.
Selection & Integration Q&A
Choose the 2BH7220 when your process needs up to 490 mbar pressure or -370 mbar vacuum at flows within its mid-range capacity. For lower pressure/vacuum or smaller flows, the 2BH7210 is more compact; for higher flows at similar pressures, the 2BH7310 offers greater capacity.
The motor must be wired for the available supply: delta for 200–240 V (50 Hz) or 220–275 V (60 Hz), star for 345–415 V (50 Hz) or 380–480 V (60 Hz). Use a motor protection switch set to 4.0 A (delta) or 2.3 A (star) and ensure the supply can handle the starting current of a 1.75 kW induction motor.
The base blower includes the motor and impeller but excludes intake filters, silencers, pressure relief valves, flexible connectors, and mounting feet. These must be ordered separately. Regular maintenance includes checking/replacing filters and verifying bearing condition; no oil changes are needed.