Elmo Rietschle 2BH1015
Elmo Rietschle ·Made in Germany · In Active Production

Elmo Rietschle 2BH1015

Elmo Rietschle 2BH1015 — Side-Channel / Regenerative Ring Blowers with Max. differential pressure -150 mbar, Motor power 1.1 kW, Noise level 64 dB.

The 2BH1015 is a single-stage side-channel blower in the G-BH1 series, driven by a single-phase 115/230 V motor rated 1.1 kW at 50 Hz and 1.3 kW at 60 Hz. It delivers up to 190 mbar in compressor mode and -150 mbar (50 Hz) or -180 mbar (60 Hz) in vacuum mode, positioning it between the smaller 2BH1009/2BH1014 and larger 2BH1023/2BH1035 siblings. Its IP55, class F motor makes it suited for continuous duty in industrial vacuum or pressure supply systems where moderate flow and pressure are required.

Max. differential pressure
-150 mbar
Motor power
1.1 kW
Noise level
64 dB
Weight
21 kg

Elmo Rietschle G-BH1 Series — Model Comparison & Selection

Model Motor power, kWNoise level, dBWeight, kgMax. differential pressure, mbarCurrent, AProtection rating
2BH1015 Current 1.36421-1808–16IP55
2BH1009 ——————
2BH1014 0.325711-553.2–6.5IP55
2BH1023 1.756969-19010–20IP55
2BH1035 2.26470-14014.3–27IP55
2BH1100 0.25310-1201.39 Δ / 0.80 YIP 55
2BH1200 0.294057-401.38 0.8 YIP55
2BH1300 0.2910051-1001.9IP 55
2BH1310 0.75616-2503.8 Δ / 2.20 YIP55
2BH1330 0.298051—1.74 Δ / 1.0 YIP55
2BH1400 0.956116-1805.6IP55
2BH1410 26528-3006.9IP55
2BH1430 1.164161104.2IP55
2BH1490 0.956116-1404.8 VVIP55
2BH1500 0.956521-904.2IP55
2BH1510 47148-4007.6–15.2IP55
2BH1530 1.66925-904.7IP55
2BH1590 1.36121-1902.75IP55
2BH1600 1.7572311309.9IP55
2BH1610 2.575481606IP55
2BH1630 2.56436-16017.1IP55
2BH1640 4.66565-240–26017.1IP55
2BH1690 2.56434-2009.9IP55
2BH1800 5.87713126011–22IP55
2BH1810 9.974188-46030.8IP55
2BH1830 5.875133-16019.4IP55
2BH1900 8.671183-19030.8IP55
2BH1910 12.676295-22026.4IP55
2BH1930 8.675212-8017.6–35.2IP55
2BH1940 19.973303-15063.1IP55
2BH1943 17.377330-16072.2 UU / 36.1 UIP55

Full specifications

Core Performance & Functional Specifications
Max. differential pressure -150 mbar (50 Hz)
60 Hz: -180 mbar
Motor power 1.1 kW (50 Hz)
60 Hz: 1.3 kW
Noise level 61 dB (50 Hz)
60 Hz: 64 dB
Max. Differenzdruck Vakuum mfr -150 mbar (50 Hz)
Max. Differenzdruck Verdichter mfr 190 mbar (50 Hz)
Max. Differenzdruck Vakuum mfr -180 mbar (60 Hz)
Max. Differenzdruck Verdichter mfr 190 mbar (60 Hz)
Bestell-Nr. mfr BH1015-1AAA-FV5-BA0 (50 Hz)
Bestell-Nr. mfr BH1015-1AAA-FV4-BA0 (60 Hz)
Max. differential pressure vacuum mfr -180 mbar (60 Hz)
Max. differential pressure compressor mfr 190 mbar (50 Hz)
Max. differential pressure compressor mfr 190 mbar (60 Hz)
Order number mfr BH1015-1AAA-FV5-BA0 (50 Hz)
Order number mfr BH1015-1AAA-FV4-BA0 (60 Hz)
Max. Differenzdruck Verdichter (alt 50 Hz) mfr 190 mbar (50 Hz)
Max. Differenzdruck Verdichter (alt 60 Hz) mfr 190 mbar (60 Hz)
Dimensions, Weight & Mechanical Design
Weight 21 kg (50 Hz)
60 Hz: 21 kg
Number of stages 1
Electrical, Power & Drive Specifications
Current 17.0 / 8.0 A (50 Hz)
60 Hz: 16.0 / 8.0 A
Frequency 50 Hz (50 Hz)
60 Hz: 60 Hz
Power supply 1~ 50/60 Hz
Voltage 115 / 230 V (50 Hz)
60 Hz: 115 / 230 V
Bemessungsstrom mfr 16.0 / 8.0 A (50 Hz)
Bemessungsstrom mfr 17.0 A (60 Hz)
Bemessungsleistung mfr 1.1 kW (50 Hz)
Bemessungsleistung mfr 1.3 kW (60 Hz)
Rated frequency mfr 60 Hz (60 Hz)
Rated current mfr 16.0 / 8.0 A (60 Hz)
Rated power mfr 1.3 kW (60 Hz)
Operating Conditions, Environment & Protection
Protection rating IP55
Operating temperature 25 degC
Schalldruckpegel mfr 61 dB(A) (50 Hz)
Schalldruckpegel mfr 64 dB(A) (60 Hz)
Sound pressure level mfr 61 dB(A) (50 Hz)
Sound pressure level mfr 64 dB(A) (60 Hz)

Description

Construction and series positioning

Performance behaviour

Electrical and control

Installation and operation

Integration & Operating Notes

Process Limits
Do not exceed 190 mbar differential pressure in compressor mode

Operating above the maximum differential pressure of 190 mbar may cause overheating, increased noise, and reduced bearing life. For vacuum duty, the limit is -150 mbar at 50 Hz and -180 mbar at 60 Hz. Use a pressure relief valve or control loop to stay within these limits.

Technical Data Sheet — G-BH1 2BH1015 compressor (EN
Mounting
Provide adequate clearance for air cooling

The motor is air-cooled and relies on free airflow around the housing. Install the blower with at least 100 mm clearance on all sides and avoid recirculation of hot air. In enclosed cabinets, forced ventilation may be required.

Technical Data Sheet — G-BH1 2BH1015 compressor (EN
Maintenance
Inspect and clean the impeller and inlet filter regularly

Dust and debris can accumulate on the impeller and in the inlet, reducing performance and causing imbalance. The service interval depends on the process air cleanliness; in dusty environments, weekly inspection is advised. Refer to the instruction manual for detailed cleaning procedures.

Technical Data Sheet — G-BH1 2BH1015 compressor (EN

Selection & Integration Q&A

When should I choose the 2BH1015 over the smaller 2BH1014 or larger 2BH1023?

Choose the 2BH1015 when you need up to 190 mbar compressor pressure or -180 mbar vacuum (60 Hz) with a single-phase 1.1–1.3 kW motor. The 2BH1014 offers lower pressure/flow, while the 2BH1023 provides higher capacity but may require three-phase power. Select based on required pressure, flow, and available power supply.

What are the requirements for the power supply and motor protection when integrating this blower?

The motor requires a single-phase 115 V or 230 V supply at 50 or 60 Hz. Use a dedicated circuit with a thermal overload relay set to the rated current (16.0 A at 115 V, 8.0 A at 230 V, 50 Hz; 17.0 A at 60 Hz). Ensure the supply can handle the starting current, which may be several times the rated current.

What are the mounting and environmental limits for the 2BH1015?

Mount the blower on a flat, vibration-free surface with sufficient clearance for air cooling. The IP55 motor allows operation in dusty and damp environments but not immersion. Ambient temperature limits are not specified in the digest; refer to the full manual. Avoid recirculation of hot air and ensure the inlet is protected from debris.

What maintenance items and accessories are not included in the base delivery?

The base delivery includes the blower only. Accessories such as inlet filters, silencers, flexible connectors, and mounting feet must be ordered separately. Maintenance items include replacement air filters (if used) and periodic cleaning of the impeller. No specific spare parts kit is listed; consult the manufacturer for recommended spares.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Technical Data Sheet — G-BH1 2BH1015 compressor (EN)
Datasheet ·467,5 КБ ·2 pp.
View PDF