Elmo Rietschle 2BH1330
Elmo Rietschle ·Made in Germany · In Active Production

Elmo Rietschle 2BH1330

Elmo Rietschle 2BH1330 — Side-Channel / Regenerative Ring Blowers with Motor power 0.29 kW, Noise level 80 dB, Ultimate pressure -90 mbar.

The 2BH1330 is a three-phase side-channel blower in the G-BH1 series, rated 0.40 kW at 50 Hz and 0.50 kW at 60 Hz, with a maximum vacuum differential pressure of 140 mbar. It is distinguished from smaller siblings (2BH1009–2BH1023) by its higher power and vacuum capability, making it suitable for continuous-duty vacuum generation in industrial processes.

Motor power
0.29 kW
Noise level
80 dB
Ultimate pressure
-90 mbar
Weight
51 kg

Elmo Rietschle G-BH1 Series — Model Comparison & Selection

Model Motor power, kWNoise level, dBWeight, kgMax. differential pressure, mbarCurrent, AProtection rating
2BH1330 Current 0.298051—1.74 Δ / 1.0 YIP55
2BH1009 ——————
2BH1014 0.325711-553.2–6.5IP55
2BH1015 1.36421-1808–16IP55
2BH1023 1.756969-19010–20IP55
2BH1035 2.26470-14014.3–27IP55
2BH1100 0.25310-1201.39 Δ / 0.80 YIP 55
2BH1200 0.294057-401.38 0.8 YIP55
2BH1300 0.2910051-1001.9IP 55
2BH1310 0.75616-2503.8 Δ / 2.20 YIP55
2BH1400 0.956116-1805.6IP55
2BH1410 26528-3006.9IP55
2BH1430 1.164161104.2IP55
2BH1490 0.956116-1404.8 VVIP55
2BH1500 0.956521-904.2IP55
2BH1510 47148-4007.6–15.2IP55
2BH1530 1.66925-904.7IP55
2BH1590 1.36121-1902.75IP55
2BH1600 1.7572311309.9IP55
2BH1610 2.575481606IP55
2BH1630 2.56436-16017.1IP55
2BH1640 4.66565-240–26017.1IP55
2BH1690 2.56434-2009.9IP55
2BH1800 5.87713126011–22IP55
2BH1810 9.974188-46030.8IP55
2BH1830 5.875133-16019.4IP55
2BH1900 8.671183-19030.8IP55
2BH1910 12.676295-22026.4IP55
2BH1930 8.675212-8017.6–35.2IP55
2BH1940 19.973303-15063.1IP55
2BH1943 17.377330-16072.2 UU / 36.1 UIP55

Full specifications

Core Performance & Functional Specifications
Motor power 0.25 kW (50 Hz)
60 Hz: 0.29 kW
Noise level 70 dB(A) (50 Hz)
60 Hz: 80 dB(A)
Ultimate pressure -80 mbar (50 Hz)
60 Hz: -90 mbar
Type mfr 2BH1330-1AH06
Order No. mfr 2BH1330-1AH16
Max. differential pressure vacuum mfr 140 mbar
Max. differential pressure vacuum mfr -80 mbar (50 Hz)
Max. differential pressure vacuum mfr -90 mbar (60 Hz)
Order No. mfr 2BH1330-1AH06 (50 Hz / 60 Hz)
Dimensions, Weight & Mechanical Design
Weight 51 kg (50 Hz)
60 Hz: 55 kg
Electrical, Power & Drive Specifications
Current 1.9 Δ / 1.1 Y A (50 Hz)
60 Hz: 1.74 Δ / 1.0 Y A
Frequency 50 Hz (50 Hz)
60 Hz: 60 Hz
Power supply 3~ 50/60 Hz
Voltage 200-240 Δ / 345-415 Y V (50 Hz)
60 Hz: 220-275 Δ / 380-480 Y V
Rated voltage mfr 220-275 Δ / 380-480 Y V (60 Hz)
Rated current mfr 1.74 Δ / 1.0 Y A (60 Hz)
Operating Conditions, Environment & Protection
Protection rating IP55
Sound pressure level mfr 58 dB(A)
Sound pressure level mfr 70 dB(A) (50 Hz)
Sound pressure level mfr 80 dB(A) (60 Hz)

Description

Construction and series positioning

Performance and operating behavior

Installation and connection

Integration & Operating Notes

Electrical
Motor winding configuration must match supply voltage

Connecting the motor in delta to a voltage above its delta rating or in star to a voltage below its star rating will cause excessive current and overheating. Verify the line voltage and frequency against the motor nameplate before wiring, and use the correct terminal links for the chosen configuration.

Technical Data Sheet — G-BH1 2BH1330 vacuum pump (EN
Process Limits
Maximum vacuum differential pressure is 140 mbar

Operating the blower above 140 mbar differential pressure in vacuum mode may cause overheating, increased noise, and reduced bearing life. Install a pressure relief valve or monitor the vacuum level to ensure the limit is not exceeded during process upsets.

Technical Data Sheet — G-BH1 2BH1330 vacuum pump (EN
Mounting
Mounting orientation affects cooling and lubrication

The blower can be mounted in various positions, but the motor cooling and bearing lubrication may be affected by orientation. Follow the manual’s recommendations for horizontal or vertical mounting to ensure proper heat dissipation and oil retention. Avoid mounting with the motor below the impeller housing to prevent lubricant migration.

Technical Data Sheet — G-BH1 2BH1330 vacuum pump (EN
Maintenance
Regular inspection of bearings and seals is required

The blower uses lubricated bearings that require periodic inspection. The manual specifies intervals for checking bearing play and replacing lubricant if applicable. In dusty environments, clean the cooling fins and impeller regularly to prevent overheating. Refer to the maintenance schedule for detailed intervals.

Technical Data Sheet — G-BH1 2BH1330 vacuum pump (EN

Selection & Integration Q&A

When should I choose the 2BH1330 over the smaller 2BH1023 or 2BH1015?

Choose the 2BH1330 when your process requires a vacuum differential pressure up to 140 mbar and a motor power of 0.40 kW at 50 Hz. The smaller siblings offer lower maximum pressure and power, so they are suitable for less demanding applications. The 2BH1330 provides higher capacity for the same footprint.

What are the requirements for the power supply and drive when using a VFD with this blower?

The motor is rated for 200–240 V Δ / 345–415 Y at 50 Hz and 220–275 V Δ / 380–480 Y at 60 Hz. When using a VFD, ensure the drive can supply the required current (2.4 A Δ / 1.4 A Y at 50 Hz) and is configured for the motor’s voltage. For operation up to 87 Hz, verify the motor insulation and bearings are suitable for the higher speed.

What maintenance items and accessories are not included in the base delivery?

The base delivery includes the blower only. Accessories such as inlet filters, silencers, flexible connectors, and mounting feet are not included and must be ordered separately. Maintenance items like replacement bearings and seals are also not included. Refer to the manual for the recommended spare parts list and service intervals.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Technical Data Sheet — G-BH1 2BH1330 vacuum pump (EN)
Datasheet ·318,2 КБ ·2 pp.
View PDF