Elmo Rietschle 2BH1400
Elmo Rietschle 2BH1400 — Side-Channel / Regenerative Ring Blowers with Max. differential pressure -180 mbar, Motor power 1.1 kW, Noise level 64 dB.
The 2BH1400 is a side-channel blower with an IE3 three-phase motor, available in voltage variants for 50/60 Hz operation, delivering up to 170 mbar differential pressure in pressure mode and -180 mbar in vacuum mode. It is distinguished from smaller siblings (2BH1009–2BH1023) by its higher power rating and larger pressure/vacuum capability, making it suitable for medium-duty pneumatic conveying, aeration, or vacuum lifting in industrial systems.
Elmo Rietschle G-BH1 Series — Model Comparison & Selection
| Model | Motor power, kW | Noise level, dB | Weight, kg | Max. differential pressure, mbar | Current, A | Protection rating |
|---|---|---|---|---|---|---|
| 2BH1400 Current | 0.95 | 61 | 16 | -180 | 5.6 | IP55 |
| 2BH1009 | — | — | — | — | — | — |
| 2BH1014 | 0.32 | 57 | 11 | -55 | 3.2–6.5 | IP55 |
| 2BH1015 | 1.3 | 64 | 21 | -180 | 8–16 | IP55 |
| 2BH1023 | 1.75 | 69 | 69 | -190 | 10–20 | IP55 |
| 2BH1035 | 2.2 | 64 | 70 | -140 | 14.3–27 | IP55 |
| 2BH1100 | 0.2 | 53 | 10 | -120 | 1.39 Δ / 0.80 Y | IP 55 |
| 2BH1200 | 0.29 | 40 | 57 | -40 | 1.38 0.8 Y | IP55 |
| 2BH1300 | 0.29 | 100 | 51 | -100 | 1.9 | IP 55 |
| 2BH1310 | 0.7 | 56 | 16 | -250 | 3.8 Δ / 2.20 Y | IP55 |
| 2BH1330 | 0.29 | 80 | 51 | — | 1.74 Δ / 1.0 Y | IP55 |
| 2BH1410 | 2 | 65 | 28 | -300 | 6.9 | IP55 |
| 2BH1430 | 1.1 | 64 | 16 | 110 | 4.2 | IP55 |
| 2BH1490 | 0.95 | 61 | 16 | -140 | 4.8 VV | IP55 |
| 2BH1500 | 0.95 | 65 | 21 | -90 | 4.2 | IP55 |
| 2BH1510 | 4 | 71 | 48 | -400 | 7.6–15.2 | IP55 |
| 2BH1530 | 1.6 | 69 | 25 | -90 | 4.7 | IP55 |
| 2BH1590 | 1.3 | 61 | 21 | -190 | 2.75 | IP55 |
| 2BH1600 | 1.75 | 72 | 31 | 130 | 9.9 | IP55 |
| 2BH1610 | 2.5 | 75 | 48 | 160 | 6 | IP55 |
| 2BH1630 | 2.5 | 64 | 36 | -160 | 17.1 | IP55 |
| 2BH1640 | 4.6 | 65 | 65 | -240–260 | 17.1 | IP55 |
| 2BH1690 | 2.5 | 64 | 34 | -200 | 9.9 | IP55 |
| 2BH1800 | 5.8 | 77 | 131 | 260 | 11–22 | IP55 |
| 2BH1810 | 9.9 | 74 | 188 | -460 | 30.8 | IP55 |
| 2BH1830 | 5.8 | 75 | 133 | -160 | 19.4 | IP55 |
| 2BH1900 | 8.6 | 71 | 183 | -190 | 30.8 | IP55 |
| 2BH1910 | 12.6 | 76 | 295 | -220 | 26.4 | IP55 |
| 2BH1930 | 8.6 | 75 | 212 | -80 | 17.6–35.2 | IP55 |
| 2BH1940 | 19.9 | 73 | 303 | -150 | 63.1 | IP55 |
| 2BH1943 | 17.3 | 77 | 330 | -160 | 72.2 UU / 36.1 U | IP55 |
Full specifications
| Max. differential pressure | -180 mbar (50 Hz) 60 Hz: -170 mbar |
| Motor power | 0.95 kW (50 Hz) 60 Hz: 1.10 kW |
| Noise level | 61 dB (50 Hz) 60 Hz: 64 dB |
| Max. differential pressure vacuum mfr | -170 mbar (60 Hz) |
| Order No. mfr | 2BH1400-0AK11 |
| Max. differential pressure (pressure) (alt 50 Hz) mfr | 170 mbar (50 Hz) |
| Max. differential pressure (pressure) (alt 60 Hz) mfr | 160 mbar (60 Hz) |
| Weight | 16 kg |
| Number of stages | 1 |
| Current | 5.6 A (50 Hz) 60 Hz: 4.8 A |
| Frequency | 50/60 Hz |
| Voltage | 190-210 V (50 Hz) 60 Hz: 190-210 / 380-420 V |
| Rated current mfr | 4.8 Δ A (50 Hz) |
| Rated current mfr | 4.8 YY A (60 Hz) |
| Efficiency class mfr | IE3 |
| Rated voltage mfr | 200 YY V (60 Hz) |
| Efficiency class mfr | IE3 (50 Hz) |
| Efficiency class mfr | NP (60 Hz) |
| Frequency tolerance mfr | ±2 % |
| Voltage tolerance three-phase motors mfr | ±10 % |
| Protection rating | IP55 |
| Sound pressure level mfr | 61 dB(A) (50 Hz) |
| Sound pressure level mfr | 64 dB(A) (60 Hz) |
Description
Construction and series positioning
The 2BH1400 is a regenerative ring blower in the G-BH1 series, equipped with an IE3 efficiency-class motor and IP55 protection. It is the largest model among the listed siblings (2BH1009, 2BH1014, 2BH1015, 2BH1023), offering higher differential pressure and flow capacity. The motor is designed for dual voltage/frequency operation: 220–240 V Δ / 380–420 V Y at 50 Hz and 440–480 V Y at 60 Hz, with rated currents of 3.7 A Δ / 2.1 A Y (50 Hz) and 2.1 A Y (60 Hz). Power output is 0.95 kW at 50 Hz and 1.10 kW at 60 Hz. The blower weighs approximately 16 kg and has insulation class F.
Performance characteristics
Maximum differential pressure is 170 mbar in pressure mode and -180 mbar in vacuum mode at 50 Hz; at 60 Hz these values are slightly lower (160 mbar and -170 mbar). Sound pressure level is 61 dB(A) at 50 Hz and 64 dB(A) at 60 Hz. No digitized curve points are available, so the exact flow-pressure relationship must be obtained from the manufacturer’s performance curves. The side-channel design provides oil-free operation and is suitable for continuous duty, but the absence of curve data means that system designers should verify operating points with Elmo Rietschle’s selection software or technical support.
Installation and operation
The blower is typically mounted on a rigid base with vibration isolators. Electrical connection requires a suitable motor protection switch and fusing according to the rated current. The IP55 rating allows outdoor installation but the motor should be protected from direct water jets. The IE3 motor is designed for direct-on-line starting; for soft starting or speed control, a variable frequency drive (VFD) may be used, but the motor insulation and bearing currents must be considered. The data sheet mentions UL and CSA certifications for the series, indicating compliance with North American standards. No specific control or I/O details are provided in the digest, so refer to the full manual for terminal box connections and wiring diagrams.
Integration & Operating Notes
The maximum differential pressure is 170 mbar in pressure mode and -180 mbar in vacuum mode at 50 Hz. At 60 Hz, the limits are 160 mbar and -170 mbar respectively. Exceeding these limits can cause overheating, motor overload, or mechanical damage. Install pressure/vacuum relief valves or monitor the process to ensure these limits are not exceeded during operation.
Selection & Integration Q&A
Choose the 2BH1400 when your required differential pressure is up to 170 mbar (pressure) or -180 mbar (vacuum) at 50 Hz, and flow demand exceeds the capacity of the 2BH1023. The 2BH1400 offers higher power (0.95 kW) than smaller models, making it suitable for medium-duty applications. For higher pressures or flows, consider larger models in the G-BH1 series not listed here.
The motor is IE3 efficiency class and can be operated with a VFD, but the VFD must be rated for the motor current (3.7 A at 50 Hz delta). Use a VFD with adjustable switching frequency and consider a dv/dt filter to protect the motor insulation. Ensure the VFD is set to the correct motor parameters (voltage, frequency, current) and that the motor is either inverter-duty rated or the VFD output is filtered. Consult Elmo Rietschle for approved VFD operation.
The standard ambient temperature limit is 40°C. For outdoor installation, the IP55 rating protects against dust and water jets, but the motor should be shielded from direct sunlight and rain. Ensure the installation location provides adequate ventilation and does not exceed the ambient temperature limit. If the blower is installed in an enclosure, provide forced ventilation to maintain temperature within limits.
The base delivery includes the blower only. For commissioning, you will need a motor protection switch, power cables, and possibly a VFD. For maintenance, spare inlet filters and possibly a replacement impeller may be needed depending on the process. Regularly check the motor bearings and clean the impeller. Refer to the manual for a detailed maintenance schedule and spare parts list.