Elmo Rietschle 2BH1800
Elmo Rietschle ·Made in Germany · In Active Production

Elmo Rietschle 2BH1800

Elmo Rietschle 2BH1800 — Side-Channel / Regenerative Ring Blowers with Max. differential pressure 260 mbar, Motor power 5.1 kW, Noise level 77 dB.

The 2BH1800 is a side-channel blower from the Elmo Rietschle G-BH1 series, configured with a 3~ IE3 motor for 50/60 Hz operation. It delivers up to 280 mbar vacuum and 260 mbar pressure at 50 Hz, positioning it as the highest-capacity model among siblings 2BH1009, 2BH1014, 2BH1015, and 2BH1023. It is intended for continuous-duty vacuum or pressure generation in industrial processes requiring oil-free, contactless compression.

Max. differential pressure
260 mbar
Motor power
5.1 kW
Noise level
77 dB
Weight
131 kg

Elmo Rietschle G-BH1 Series — Model Comparison & Selection

Model Motor power, kWNoise level, dBWeight, kgMax. differential pressure, mbarCurrent, AProtection rating
2BH1800 Current 5.87713126011–22IP55
2BH1009 ——————
2BH1014 0.325711-553.2–6.5IP55
2BH1015 1.36421-1808–16IP55
2BH1023 1.756969-19010–20IP55
2BH1035 2.26470-14014.3–27IP55
2BH1100 0.25310-1201.39 Δ / 0.80 YIP 55
2BH1200 0.294057-401.38 0.8 YIP55
2BH1300 0.2910051-1001.9IP 55
2BH1310 0.75616-2503.8 Δ / 2.20 YIP55
2BH1330 0.298051—1.74 Δ / 1.0 YIP55
2BH1400 0.956116-1805.6IP55
2BH1410 26528-3006.9IP55
2BH1430 1.164161104.2IP55
2BH1490 0.956116-1404.8 VVIP55
2BH1500 0.956521-904.2IP55
2BH1510 47148-4007.6–15.2IP55
2BH1530 1.66925-904.7IP55
2BH1590 1.36121-1902.75IP55
2BH1600 1.7572311309.9IP55
2BH1610 2.575481606IP55
2BH1630 2.56436-16017.1IP55
2BH1640 4.66565-240–26017.1IP55
2BH1690 2.56434-2009.9IP55
2BH1810 9.974188-46030.8IP55
2BH1830 5.875133-16019.4IP55
2BH1900 8.671183-19030.8IP55
2BH1910 12.676295-22026.4IP55
2BH1930 8.675212-8017.6–35.2IP55
2BH1940 19.973303-15063.1IP55
2BH1943 17.377330-16072.2 UU / 36.1 UIP55

Full specifications

Core Performance & Functional Specifications
Max. differential pressure 260 mbar (50 Hz, 2BH1800-2AK11)
60 Hz, 2BH1800-2AK11: 230 mbar
Motor power 5.1 kW (50 Hz, 2BH1800-2AK11)
60 Hz, 2BH1800-2AK11: 5.8 kW
Noise level 75 dB(A) (50 Hz, 2BH1800-2AK11)
60 Hz, 2BH1800-2AK11: 77 dB(A)
Max. differential pressure vacuum mfr -280 mbar (50 Hz)
Max. differential pressure vacuum mfr -250 mbar (60 Hz)
Motor type mfr 3~
Series mfr G-BH 1 N HT
Model mfr 2BH1800-2
Product type mfr Side channel blower with IE3-motors
Operation mfr Vacuum pump / compressor, continuous operation o
Approvals mfr UL and CSA approved (UL 1450 and CAN/CSA C22.2 N
Performance curves basis mfr Air at 15 °C, atmospheric pressure 1013 mbar, to
Total pressure difference validity mfr Suction and ambient temperature up to 25 °C
Dimensions, Weight & Mechanical Design
Weight 131 kg (2BH1800-2AK11)
Electrical, Power & Drive Specifications
Current 19.4 A (50 Hz, 2BH1800-2AK11)
60 Hz, 2BH1800-2AK11: 22.0 / 11.0 A
Frequency 50 Hz (2BH1800-2AK11)
Power supply 3~ 50/60 Hz
Voltage 190-210 V (50 Hz, 2BH1800-2AK11)
60 Hz, 2BH1800-2AK11: 190-210 / 380-480 V
Efficiency class mfr IE3 (50 Hz)
Efficiency class mfr IE3 (60 Hz)
Frequency (alt 2BH1800-2AK11) mfr 60 Hz (2BH1800-2AK11)
Operating Conditions, Environment & Protection
Protection rating IP55
Operating temperature 25 degC (maximum for stated total pressure differences)
Sound pressure level mfr 75 dB(A) (50 Hz)
Sound pressure level mfr 77 dB(A) (60 Hz)

Description

Construction and Series Positioning

The 2BH1800 is a regenerative (side-channel) blower with a dynamically balanced impeller running without contact, ensuring oil-free operation. Within the G-BH1 series, it is the largest model, offering the highest differential pressures and motor power. The IE3 motor and IP55 protection make it suitable for demanding environments. The 3~ motor is designed for 50/60 Hz dual-frequency operation, with voltage ranges 190–210 V at 50 Hz and 200 V at 60 Hz.

Performance Characteristics

At 50 Hz, the blower achieves a maximum vacuum of -280 mbar and pressure of 260 mbar; at 60 Hz, these values are -250 mbar and 230 mbar, respectively. The motor delivers 5.1 kW at 50 Hz and 5.8 kW at 60 Hz, with currents of 22.0 A and 19.4 A. Sound pressure level is 75 dB(A) at 50 Hz and 77 dB(A) at 60 Hz. The unit weighs approximately 131 kg. No digitized curve points are available, so precise flow rates must be derived from the technical data sheet or manufacturer's performance curves.

Installation and Operation

Installation requires a flat, vibration-isolated mounting surface. The IP55 protection allows operation in dusty and humid environments but does not permit immersion. The motor must be connected to a suitable 3-phase supply with overload protection. The insulation class F provides thermal margin. The blower can be used for both vacuum and pressure applications, but the direction of rotation must be correct for the desired function. The technical data sheet indicates compliance with UL 1450 and CAN/CSA C22.2 No. 68-09 (certificate E225239).

Integration & Operating Notes

Electrical
Supply voltage must match 190–210 V at 50 Hz or 200 V at 60 Hz

Exceeding the voltage range can overheat the motor or cause insulation failure. The 2BH1800 is designed for dual-frequency operation, but the supply must be within the specified limits. Use a voltage stabilizer if the mains fluctuate beyond ±5%.

Technical Data Sheet — 2BH1800 HT vacuum pump (EN
Maintenance
Regularly clean the impeller and housing to maintain performance

Dust buildup on the impeller can cause imbalance, vibration, and reduced efficiency. Inspect and clean at intervals determined by the process dust load. Use compressed air or a soft brush; do not use solvents that may damage the impeller. Check motor bearings for noise or play and replace as needed.

Technical Data Sheet — 2BH1800 HT vacuum pump (EN

Selection & Integration Q&A

When should I choose the 2BH1800 over the smaller 2BH1009 or 2BH1023?

Choose the 2BH1800 when your process requires vacuum up to -280 mbar or pressure up to 260 mbar at 50 Hz, and flow rates that the smaller models cannot achieve. The 2BH1009 and 2BH1023 offer lower maximum pressures and motor power, so they are suitable for lower-demand applications. The 2BH1800 is the highest-capacity model in the series, but its larger size and 131 kg weight may require more robust mounting.

What are the power supply and protection requirements for the 2BH1800?

The 2BH1800 requires a 3-phase supply of 190–210 V at 50 Hz or 200 V at 60 Hz. It draws 22.0 A at 50 Hz and 19.4 A at 60 Hz. Use a motor protection circuit breaker or fuses rated for the current, and ensure the supply can handle the starting current. The motor is IE3 efficiency and IP55 protected, but the installation must include proper earthing and overload protection.

What are the mounting and environmental limits for the 2BH1800?

Mount the blower on a flat, rigid surface that can support its 131 kg weight and absorb vibration. The IP55 rating allows operation in dusty and wet environments, but avoid direct water jets and ensure adequate ventilation. Ambient temperature limits are not specified in the provided facts; refer to the manual. The blower can operate continuously, but ensure the motor current does not exceed the rated values.

What maintenance is required and what accessories are not included?

The 2BH1800 uses contactless operation, so no internal lubrication is needed. However, regularly inspect and clean the impeller and housing to prevent dust buildup. Check motor bearings periodically and replace if noisy. The base delivery does not include power cables, motor protection devices, or mounting feet; these must be ordered separately. Refer to the manual for specific service intervals.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Technical Data Sheet — 2BH1800 HT vacuum pump (EN)
Datasheet ·342,5 КБ ·2 pp.
View PDF