Peter Huber Kältemaschinenbau Unichiller 180T
Peter Huber Kältemaschinenbau ·Made in Germany · In Active Production

Peter Huber Kältemaschinenbau Unichiller 180T

Peter Huber Kältemaschinenbau Unichiller 180T — Recirculating chillers.

The Unichiller 180T is a 400 V three-phase recirculating chiller with a -20 to 40 °C window and 18 kW at 0 °C, dropping to 6 kW at -20 °C. It is the larger-capacity member of the Unichiller T series, distinguished from the 110T siblings by its 18 kW class rather than 74/65 dB(A) noise variants. It serves externally closed process loops requiring a G1 1/4 male pump connection and at least 14 l fill.

Peter Huber Kältemaschinenbau Unichiller Series — Model Comparison & Selection

Model Pump typeSafety classTemperature range, °CPower supplyExpansion volume, m³Minimum fill volume, m³
Unichiller 180T Current D3I / NFL-20–40400V 3~ 50Hz0.0390.014
Unichiller 110T C3I / NFL-10–40400V 3~ 50Hz0.007—
Unichiller 110T-H C3III / FL-10–100400V 3~ 50Hz0.007—
Unichiller 110Tw C3I / NFL-20–40400V 3~ 50Hz——
Unichiller 130T C3I / NFL-10–40400V 3~ 50Hz0.0390.014
Unichiller 130T-H C3III / FL-10–100400V 3~ 50Hz0.0390.014
Unichiller 130Tw C3I / NFL-20–40400V 3~ 50Hz——
Unichiller 160T C3I / NFL-10–40400V 3~ 50Hz0.0390.014
Unichiller 160T-H C3III / FL-10–100400V 3~ 50Hz0.0390.014
Unichiller 160Tw C3I / NFL-20–40400V 3~ 50Hz0.01—
Unichiller 180-H E1III / FL-20–100400V 3~ 50Hz0.0480.018
Unichiller 180T-H D3III / FL-20–100400V 3~ 50Hz0.0390.014
Unichiller 180Tw D3I / NFL-20–40460V 3~ 60Hz0.0220.015
Unichiller 180Tw-H D3III / FL-20–100400V 3~ 50Hz0.0220.015
Unichiller 180w E1I / NFL-20–40400V 3~ 50Hz0.0480.018
Unichiller 180w-H E1III / FL-20–100400V 3~ 50Hz0.0480.018
Unichiller 200T D3I / NFL-20–40460V 3~ 60Hz0.0390.014
Unichiller 200Tw-H D3III / FL-20–100400V 3~ 50Hz0.0220.015
Unichiller 210T D3I / NFL-20–40400V 3~ 50Hz0.0390.014
Unichiller 210T-H D3III / FL-20–100400V 3~ 50Hz0.0390.014
Unichiller 210Tw D3I / NFL-20–40400V 3~ 50Hz0.0220.015
Unichiller 230-H E1III / FL-20–100400V 3~ 50Hz0.0480.018
Unichiller 230w E1I / NFL-20–40400V 3~ 50Hz0.0480.018
Unichiller 230w-H E1III / FL-20–100460V 3~ 60Hz0.0480.018
Unichiller 250T D3I / NFL-20–40400V 3~ 50Hz0.0390.014
Unichiller 250T-H D3III / FL-20–100400V 3~ 50Hz0.0390.014
Unichiller 250Tw-H D3III / FL-20–100400V 3~ 50Hz0.0220.015
Unichiller 260T D3I / NFL-20–40460V 3~ 60Hz0.0390.014
Unichiller 260T-H D3III / FL-20–100400V 3~ 50Hz0.0390.014
Unichiller 260Tw D3I / NFL-20–40400V 3~ 50Hz0.0220.015
Unichiller 260Tw-H D3III / FL-20–100400V 3~ 50Hz0.0220.015
Unichiller 300T D3I / NFL-20–40400V 3~ 50Hz0.0390.014
Unichiller 300T-H D3III / FL-20–100460V 3~ 60Hz0.0390.014
Unichiller 300Tw D3I / NFL-20–40460V 3~ 60Hz0.0220.015
Unichiller 300Tw-H D3III / FL-20–100400V 3~ 50Hz0.0220.015
Unichiller 350T D3I / NFL-20–40460V 3~ 60Hz0.0390.014
Unichiller 350Tw-H D3III / FL-20–100400V 3~ 50Hz0.0220.015
Unichiller 500Tw D3I / NFL-20–40400V 3~ 50Hz0.007—
Unichiller 600Tw D3I / NFL-20–40400V 3~ 50Hz0.007—
Unichiller 600Tw-H D3III / FL-20–100400V 3~ 50Hz0.007—
Unichiller 700Tw D3I / NFL-20–40400V 3~ 50Hz0.007—
Unichiller 800Tw D3I / NFL-20–40400V 3~ 50Hz0.007—
Unichiller GL 1000w Pressure pump, speed notI / NFL-20–40460V 3~ 60Hz0.05—
Unichiller GL 200w Pressure pump, speed notI / NFL-20–40460V 3~ 60Hz0.03—
Unichiller GL 250w Pressure pump, speed notI / NFL-20–40460V 3~ 60Hz0.03—
Unichiller GL 300w Pressure pump, speed notI / NFL-20–40400V 3~ 50Hz0.03—
Unichiller GL 400w Pressure pump, speed notI / NFL-20–40400V 3~ 50Hz0.03—
Unichiller GL 750w Pressure pump, speed notI / NFL-20–40400V 3~ 50Hz0.05—
Unichiller P180 E2I / NFL-20–40—0.0480.018
Unichiller P180-H E2III / FL-20–100400V 3~ 50Hz0.0480.018
Unichiller P180w E2I / NFL-20–40400V 3~ 50Hz0.0480.018
Unichiller P180w-H E2III / FL-20–100460V 3~ 60Hz0.0480.018
Unichiller P230 E2I / NFL-20–40460V 3~ 60Hz0.0480.018
Unichiller P230-H E2III / FL-20–100460V 3~ 60Hz0.0480.018

Full specifications

Core Performance & Functional Specifications
Expansion volume 39 l
Minimum fill volume 14 l
Pump connection G1 1/4 AG male
Pump speed adjustable no
Pump type D3
External sensor connection Pt100
Temperature range -20...40 °C
Dimensions, Weight & Mechanical Design
Weight 533 kg
Electrical, Power & Drive Specifications
Current consumption 23 A (max)
Power supply 400V 3~ 50Hz
Interfaces, Connections & Control
Controller Pilot ONE
Digital interface Ethernet, USB (Host u. Device), RS232
Operating Conditions, Environment & Protection
Ambient temperature limit 5...40 °C
Cooling capacity 15 kW (at 15 °C)
at 0 °C: 18 kW · at -10 °C: 11 kW · at -20 °C: 6 kW
Protection rating IP20
Standards, Safety & General Data
Safety class I / NFL

Description

Construction and series positioning

Behavior across the temperature window

Installation, control and operation

Integration & Operating Notes

Electrical
Site must supply a 400 V 3~ 50 Hz connection without a plug

The 23 A maximum current requires cable and breaker sizing at the installation site, and because three-phase devices below 63 A are delivered with cable but without a plug, the customer must provide the mating connection before commissioning.

Unichiller 180T Datasheet, page 2
Electrical
Do not combine -5% voltage with +2% frequency

Voltage and frequency tolerances must be satisfied simultaneously; the datasheet explicitly disallows a -5% voltage with +2% frequency combination, so supply quality should be checked against both limits together rather than independently.

Unichiller 180T Datasheet, page 2
Mounting
Allow 50 to 200 cm wall clearance per side for maintenance

Free-standing models require this clearance on either side for service access, and the 533 kg weight plus 905 x 1582 x 1900 mm footprint must be planned for floor loading and rigging before the unit is moved into place.

Unichiller Operation Manual, page 25
Mounting
Indoor installation only, at least 300 lx, below 2000 m

The unit may only be used indoors with illuminance of at least 300 lx and at altitudes up to 2000 m; it must not be installed or started inside an ATEX zone because it is not explosion-protected.

Unichiller Operation Manual, pages 13 and 25
Process Limits
Externally closed circuits only; minimum 14 l fill

The unit is designed for externally closed applications, with a minimum filling capacity of 14 l and 39 l expansion volume; the loop must be designed to stay within these volumes and the G1 1/4 male pump connections must be counterheld and not over-torqued during hose installation.

Unichiller 180T Datasheet, page 1; Unichiller Operation Manual, pages 28 and 34
Cooling & Media
Capacity is rated at 20 °C room temperature

Output data are valid at 20 °C room temperature; if the ambient rises toward the 40 °C limit, cooling capacity may drop, so plant-room ventilation and heat rejection must be sized for the actual ambient rather than the 18 kW at 0 °C figure alone.

Unichiller 180T Datasheet, page 2
Maintenance
Refrigerant work only by approved refrigeration contractors

The R-449A charge of 5.75 kg (8.0 t CO2 equivalent) triggers periodic F-gas leak checks, and any work on the refrigerant circuit must be carried out by approved refrigeration/air-conditioning system contractors; the room volume must also be checked against the refrigerant limit per m³.

Unichiller 180T Datasheet, page 1; Unichiller Operation Manual, pages 15 and 17
Operation
Shut off cooling water even for overnight downtime

The cooling water supply must be shut off even for short downtimes such as overnight to prevent water damage and corrosion, and electrical lines directly below a water-cooled unit must be protected against liquid ingress from condensation.

Unichiller Operation Manual, page 28
Mounting
Activate leveling feet and parking brakes before start-up

The parking brakes at the casters must be activated and/or the leveling feet unscrewed before the unit is put into operation, so that the 533 kg unit cannot move and cause crushing injuries during running.

Unichiller Operation Manual, page 31

Selection & Integration Q&A

When should I choose the Unichiller 180T instead of a 110T or 110Tw sibling?

Pick the 180T when the process needs the 18 kW class at 0 °C and can accept its fixed-speed D3 pump and larger footprint. The 110T/110T-H are 74 dB(A) variants and the 110Tw/110Tw-H are 65 dB(A) variants; choose those when noise or capacity closer to the 110 class matters more than the 180T's higher cooling output.

What must the site and hydraulic circuit provide to connect the 180T?

A 400 V 3~ 50 Hz supply with 23 A maximum current and a mating plug, since the unit ships with cable but no plug. The loop must be externally closed with at least 14 l fill and 39 l expansion volume, and hoses must match the G1 1/4 male pump connections, counterheld and not over-torqued.

What installation environment and duty limits apply to the 180T?

Indoors only, 5 to 40 °C ambient, at least 300 lx, up to 2000 m altitude, and not inside an ATEX zone. Allow 50 to 200 cm wall clearance per side for maintenance, activate leveling feet and parking brakes before start-up, and expect capacity to fall as room temperature rises above the 20 °C rating point.

What maintenance and consumables are not included with the 180T delivery?

No plug is included for the 400 V three-phase connection. Refrigerant circuit work on the 5.75 kg R-449A charge must be done by approved refrigeration contractors, and the 8.0 t CO2 equivalent triggers periodic F-gas leak checks. Cooling water must be shut off even overnight, and the room volume must be checked against the refrigerant limit per m³.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Unichiller 180T Datasheet
Datasheet ·17,9 КБ ·2 pp.
View PDF
PDF
Unichiller Operation Manual
Manual ·2,8 МБ ·82 pp.
View PDF